Husqvarna 326RJX Series Скачать руководство пользователя страница 6

 

6 – 

 

English

 

GENERAL SAFETY PRECAUTIONS

 

Important

Personal protective equipment

 

HEARING PROTECTION

Wear hearing protection that provides adequate noise 
reduction.

EYE PROTECTION

Always wear approved eye protection. If you use a visor then 
you must also wear approved protective goggles. Approved 
protective goggles must comply with standard ANSI Z87.1 in 
the USA or EN 166 in EU countries.

GLOVES

Gloves should be worn when necessary, e.g., when 

fi

tting 

cutting attachments.

BOOTS

Wear sturdy, non-slip boots.

CLOTHING

Wear clothes made of a strong fabric and avoid loose clothing 
that can catch on twigs and branches. Always wear heavy, 
long pants. Do not wear jewellery, shorts sandals or go 
barefoot. Secure hair so it is above shoulder level.

FIRST AID KIT

Always have a 

fi

rst aid kit nearby.

 

Machine

  

′′′′

 

s safety equipment

 

This section describes the machine

 

 

s safety equipment, its 

purpose, and how checks and maintenance should be carried 
out to ensure that it operates correctly. See the ”What is 
what?” section to locate where this equipment is positioned 
on your machine.

IMPORTANT!

The machine is only designed for trimming grass, grass 
clearing and/or forestry clearing.

The only accessories you can operate with this engine unit 
are the cutting attachments we recommend in the chapter 
on Technical data.

Never use the machine if you are tired, if you have drunk 
alcohol, or if you are taking medication that could affect your 
vision, your judgement or your co-ordination.

Wear personal protective equipment. See instructions 
under the heading Personal protective equipment.

Never use a machine that has been modi

fi

ed in any way 

from its original speci

fi

cation.

Never use a machine that is faulty. Carry out the checks, 
maintenance and service instructions described in this 
manual. Some maintenance and service measures must be 
carried out by trained and quali

fi

ed specialists. See 

instructions under the heading Maintenance.

All covers and guards must be 

fi

tted before starting. Make 

sure the spark plug cap and HT lead are not damaged. 
Otherwise you could get an electric shock.

The machine operator must ensure that no people or 
animals come closer than 15 metres while working. When 
several operators are working in the same area the safety 
distance should be at least twice the tree height and no less 
than 15 metres.

!

 

WARNING! Never allow children to use or be 
in the vicinity of the machine. As the 
machine is equipped with a spring-loaded 
stop switch and can be started by low speed 
and force on the starter handle, even small 
children under some circumstances can 
produce the force necessary to start the 
machine. This can mean a risk of serious 
personal injury. Therefore remove the spark 
plug cap when the machine is not under 
close supervision.

 

IMPORTANT!

A clearing saw, brushcutter or trimmer can be dangerous if 
used incorrectly or carelessly, and can cause serious or 
fatal injury to the operator or others. It is extremely 
important that you read and understand the contents of this 
operator’s manual.

You must use approved personal protective equipment 
whenever you use the machine. Personal protective 
equipment cannot eliminate the risk of injury but it will 
reduce the degree of injury if an accident does happen. Ask 
your dealer for help in choosing the right equipment.

!

 

WARNING! Listen out for warning signals or 
shouts when you are wearing hearing 
protection. Always remove your hearing 
protection as soon as the engine stops.

Содержание 326RJX Series





































Отзывы: