manualshive.com logo in svg

Husqvarna 326RJX Series, Руководство оператора

Поделиться
Скачать
Husqvarna 326RJX Series Скачать руководство пользователя страница 12

 

12 – 

 

English

 

ASSEMBLY

 

Fitting the blade guard/combination 
guard, grass blade and grass cutter

 

•

Hook the blade guard/combination guard (A) onto the 

fi

tting on the shaft and secure with the bolt. 

 

CAUTION! 

 

 

Use the recommended blade guard. See the Technical 
data section.

•

Fit the drive disc (B) on the output shaft.

•

Turn the blade shaft until one of the holes in the drive disc 
aligns with the corresponding hole in the gear housing.

•

Insert the locking pin (C) in the hole to lock the shaft.

•

Place the blade (D), support cup (E) and support 

fl

ange 

(F) on the output shaft.

•

Fit the nut (G). The nut must be tightened to a torque of 
35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool 
kit. Hold the shaft of the spanner as close to the blade 
guard as possible. To tighten the nut, turn the spanner in 
the opposite direction to the direction of rotation (Caution! 
left-hand thread). 

 

Fitting other guards and cutting 
attachments

 

•

Fit the correct trimmer guard (A) for use with the trimmer 
head. Hook the trimmer guard/combination guard onto 
the 

fi

tting on the shaft and secure with the bolt (L). 

•

Fit the drive disc (B) on the output shaft.

•

Turn the blade shaft until one of the holes in the drive disc 
aligns with the corresponding hole in the gear housing.

•

Insert the locking pin (C) in the hole to lock the shaft.

•

Screw on the trimmer head/plastic blades (H) in the 
opposite direction to the direction of rotation.

•

To dismantle, follow the instructions in the reverse order.

G

F

D

B

C

A

E

H

H

Содержание 326RJX Series





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды