background image

 

GENERAL SAFETY PRECA

 

UTIONS

 

English

 

 –

 

 

 

7

 

CLO

 

THING

Wear clothes made of a strong fabric and avoid loose 
clothing that can catch on twigs and branches. Always 
wear heavy, long pants. Do not wear jewellery, shorts 
sandals or go barefoot. Secure hair so it is above shoulder 
level.

FIRST AID KIT

Always have a first aid kit nearby.

 

Mac

 

hine

  

′′′′

 

s safety equipment

 

This section descr

 

ibes the machine

 

 

s safety equipment, 

its purpose, and how checks and maintenance should be 
carried out to ensure that it operates correctly. See the 
”What is what?” section to locate where this equipment is 
positioned on your machine.

The life span of the machine can be reduced and the risk 
of accidents can increase if machine maintenance is not 
carried out correctly and if service and/or repairs are not 
carried out professionally. If you need further information 
please contact your nearest service workshop.

 

Thr

 

ottle lockout

 

The throttle loc

 

kout is designed to prevent accidental 

operation of the throttle control. When you press the lock 
(A) (i.e. when you grasp the handle) it releases the throttle 
control (B). When you release the handle the throttle 
control and the throttle lockout both move back to their 
original positions. This movement is controlled by two 
independent return springs. This arrangement means that 

the throttle control is automatically locked at the idle 
setting.

Make sure the throttle control is locked at the idle setting 
when the throttle lockout is released.

Press the throttle lockout and make sure it returns to its 
original position when you release it.

Check that the throttle control and throttle lockout move 
freely and that the return springs work properly.

See instructions under the heading Start. Start the hedge 
trimmer and apply full throttle. Release the throttle trigger 
and check that the blades stop and remain stationary. If 
the blades move when the throttle trigger is in the idle 
position then the carburettor idle setting must be adjusted. 
See instructions under the heading Maintenance.

IMPORTANT!

All servicing and repair work on the machine requires 
special training. This is especially true of the machine

 

 

safety equipment. If your machine fails any of the checks 
described below you must contact your service agent. 
When you buy any of our products we guarantee the 
availability of professional repairs and service. If the 
retailer who sells your machine is not a servicing dealer, 
ask him for the address of your nearest service agent.

!

 

W

 

ARNING! Never use a machine with 

faulty safety equipment. The machine’s 
safety equipment must be checked and 
maintained as described in this section. 
If your machine fails any of these checks 
contact your service agent to get it 
repaired.

Содержание 323HD60





























Отзывы: