To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the
battery charger is not damaged and that there
are no cracks in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a
dry cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery
and the battery charger are clean before the
battery is put in the battery charger or the
product.
To replace the trimmer line
1. Hold the lower half (A) of the trimmer head
stable with one hand.
B
A
2. Use your opposite hand to turn the top half (B)
of the trimmer head clockwise.
3. Continue to turn the the top half of the trimmer
head until the triangles (C) align.
C
4. Remove and discard the remaining trimmer
line, if there is.
5. Cut approximately 5.5 m/18 ft of new trimmer
line.
6. Put one end of the trimmer line into one of the
holes.
7. Push the trimmer line through the trimmer
head and through the opposite hole.
X
X
8. Pull the trimmer line through the trimmer head
until there is an equal length of trimmer line on
each side.
9. Hold the trimmer head lower half stable with
one hand.
10.Use your opposite hand to turn the top half
counterclockwise.
11.Continue to turn the knob until approximately
127 mm/5 in of trimmer line is extended from
each hole.
1511 - 006 - 11.01.2022
19