Husqvarna 300-SERIES COUPLING Скачать руководство пользователя страница 11

Страница: 11 / 12

English---11

115289826 Rev. 2 4/27/10

MAINTENANCE

Maintenance schedule

Below you will find some general mainte-

nance instructions. If you need further

information, please contact your nearest

service agent.

Daily maintenance

Check that the blades do not move when

the engine is idling or when the choke is

in the start throttle position.

Check that the hand guard is not dam-

aged. Replace the guard if damaged.

Weekly maintenance

Fill the gear housing with grease. New

machines are first filled with grease after

approximately 20 hours of operation, and

subsequently approximately every 60

hours of operation.

Check that the screws that hold the

blades together are correctly tightened.

Technical data

Weight

Weight, lbs/kg

4,8/2,2

Blades

Length, in/cm

22/56

Blade speed, cuts/min.

9000 rpm / 3315

Gear housing

There are two grease plugs for filling lubri-

cant on the gear housing. Use a grease gun

to fill with grease. New machines are first

filled with grease after approximately 20

hours of operation, and subsequently

approximately every 60 hours of operation.

Use Husqvarna’s special grease,

no. 503 98 96-01.

CAUTION! The gear housing must not be

filled completely with grease. The grease

expands as the machine heats up during

operation. If the gear housing was com-

pletely filled with grease it could damage

the seals and lead to leakage of grease.
The grease in the bevel gear does not nor-

mally need to be changed except if repairs

are carried out.

Cleaning and lubrication

Clean any resin and plant residue from the

blades using cleaning agent 531 00 75-13

(UL22) before and after using the machine.
Lubricate the blade bars with special

grease, part no. 531 00 75-12 (UL 21) be-

fore long periods of storage.

The owner is responsible for the perfor-

mance of all required maintenance as

defined in the operator’s manual.

Содержание 300-SERIES COUPLING













Результаты поиска

Содержание 300-SERIES COUPLING

Отзывы:

Похожие инструкции для 300-SERIES COUPLING

Бренды по названию

Популярные бренды

Husqvarna 300-SERIES COUPLING, Руководство оператора

Результаты поиска

Содержание 300-SERIES COUPLING

Отзывы:

Похожие инструкции для 300-SERIES COUPLING

Бренды по названию

Популярные бренды