background image

Periodic Service Schedule

2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual

Page 31

ý 

WARNING

• If any problems are found during scheduled inspection or service, do not operate vehicle until

repairs are made. Failure to make necessary repairs could result in fire, property damage,
severe personal injury, or death.

Annual service by
trained technician only
(or every 100 hours of operation, 
whichever comes first)

Engine

Check for leaks around gaskets, fill plugs, 
etc.

Kawasaki gasoline engines: 

Adjust 

valve clearance. 

See Kawasaki FH680D 

Service Manual.

Gasoline vehicles:

 Inspect, clean, and 

gap spark plug; replace if necessary. See 
authorized dealer or trained technician for 
service.

Diesel vehicles:

 Check the v-belt for 

proper tension or damage. Adjust or 
replace if necessary.

Diesel vehicles:

 Change engine coolant.

See Section 15 – Radiator and Cooling 
System in the maintenance and service 
manual.

Radiator

Diesel vehicles:

 Check clights for 

tightness; check hoses for cracks. 
Replace if necessary.

Engine air intake system

Replace air filter element. 

See Air Intake 

System on page 42.

Check clights for tightness; check hose for 
cracks.

General vehicle

Check for loose hardware and tighten if 
necessary.

Fuel filters

Replace. Dispose of used filters properly. 

PERIODIC SERVICE SCHEDULE

REGULAR INTERVAL

SERVICE

Содержание 2007 HUV 4421-D

































































Отзывы: