Husqvarna Viking Mega Quilter, Руководство пользователя

Страница: 21 / 44

19
C
B
A
Operating your MEGA QUILTER™
Threading the machine
1. Raise the presser foot lifter. Press the Needle Up/Down button twice to raise the
needle to its highest position.
Switch off the main switch and unplug the machine.
2. Place a thread spool on the spool pin.
3. Pass the thread through the guide on the thread guide bar (A) from behind.
4. Pass the thread through two holes in the thread guide plate (B), then draw the thread
between the pre-tension disks (C).
Note: The standard pre-tension dial setting is for the screw head sinks about 4 mm (1/8 Þ to 3/16 Þ ).
If you find that the thread is too loose while sewing, you can pass the thread through all three holes in
the guide plate (B).