Husqvarna Viking Eden Rose Скачать руководство пользователя страница 3

Страница: 3 / 48

A limited edition accessory foot package is packed in
the box with your HUSQVARNA VIKING

EdEN RoSE™

sewing machine. The package contains the following
optional presser feet:

GatherinG Foot (4127971-45)

Gather fabric or gather and attach a ruffle in one step. Suitable for light to

medium weight fabrics. Straight stitch, (left needle position), length 4. The longer

the length, the more fabric will gather. Snap on Gathering Foot.

BraidinG Foot (4129898-45)

Couch or stitch braid or cord for decorative embellishment. Stabilize as needed.

Straight stitch, length 2.5 or Zigzag stitch, length 2 to 4, width wide enough to

go over braid or cord (or use decorative stitch).

Presser Foot Kit

For Gathered Fabric:

Place fabric under Gathering Foot and sew. Increase

upper tension for tighter gathers.

to Gather and attach Gathered Fabric in one step:

1. Place fabric to be gathered under the presser foot

right side up.

2. Place fabric to have ruffles attached to it

in the groove of the foot right side down.

3. Sew, guiding the under fabric but do not

hold it back. Keep the top fabric in the

groove moving it steadily as needed. Increase

the stitch length and upper tension for more

gathers.

1. Thread braid from top of foot into the

guide hole and under the foot.

2. Lower the Presser Foot and stitch. The

Gimping /Braiding Guide accessory

(4125544-45) will guide the braid as you

sew.

Содержание Eden Rose
















































Результаты поиска

Содержание Eden Rose

Отзывы:

Похожие инструкции для Eden Rose

Бренды по названию

Популярные бренды

Husqvarna Viking Eden Rose, Руководство пользователя

Результаты поиска

Содержание Eden Rose

Отзывы:

Похожие инструкции для Eden Rose

Бренды по названию

Популярные бренды