EN © 2022 HUSLOG
All Rights Reserved
Device for cavitation peeling
16
When using the device, do not press the spatula too hard against the skin. Try to keep it
tilted at an angle of about 45 degrees to the skin surface. Move the spatula along the skin
at a slow pace and do not keep it in one place for too long.
The frequency of application of the device is determined by the individual needs of the
skin. We recommend prior consultation with a specialist in this matter. However, the
device should not be used several times in one day. Always disinfect the spatula before
and after use.
5. Troubleshooting
If you have problems with the unit, please refer to the following tips.
The device does
not switch on
Check that the battery is charged.
Check that the cables, plugs and sockets supplying power to the
unit are not damaged.
After switching
on, the spatula
does not vibrate
Check that you are not pressing the spatula against the skin too
hard.
Perhaps there has been a damage to the device. Contact the
manufacturer's service department.
If the problem persists, contact the manufacturer's service department.
6. Cleaning of the device
To extend the service life of the device:
•
WARNING!
The device must not be submerged in water or washed under running
water!
•
Clean the device after each use.
•
Disinfect with any disinfectant or with hydrogen peroxide.
•
Before cleaning, make sure that the device is switched off and is not being charged.
•
For cleaning use only a dry cloth. Never use any agent with a high concentration of
acids, alkalis or abrasives.
•
Store the device and its accessories in a dry place away from the reach of children,
sources of heat and moisture.
•
Avoid very high temperatures, for it can shorten the life of electric and electronic
components, melt the plastic parts and destroy the battery.
The packaging of the device can be recycled in accordance with local regulations.
Symbol for corrugated cardboard (packaging material).
The packaging elements should be disposed of in appropriate containers.
Marking of the container into which the stamping should be thrown - plastic/metal.
