EN © 2022 HUSLOG
All Rights Reserved
Device for cavitation peeling
13
You print a version of the user manual with the large font size or download it from the web
address below:
https://mptech.eu/qr/huslog
3. Device construction
4. The use of the equipment
4.1 Charging the battery
The battery should be fully charged before the first use of product. Several charging and
discharging cycles may be necessary to achieve full battery capacity.
Avoid excessive battery discharge. This can damage the battery or shorten its service life.
A low battery is indicated by a short double beep and the device is switched off.
The device can heat up during charging. It is a regular occurrence and should not affect the
stability or performance of the device. Do not leave the device to be charged unattended
as this may result in fire, damage to the device or its surroundings etc.
To charge your device, connect the USB type C plug of the supplied cable to the USB_C on
your device. Connect the other end of the cable to a powered USB adapter or, for example,
USB Type C connector
(underneath)
On/Off Operating mode
button
Protective cap
Spatula
Appliance body
Modes LEDs
Side bar
