background image

1

WARRANTY

LIMITED NON-ENGINE WARRANTY STATEMENT

Techtronic Industries North America, Inc. warrants to the original retail purchaser that this HUSKY

®

 brand pressure 

washer is free from defect in material and workmanship and agrees to repair or replace, at Techtronic Industries North 
America, Inc.’s discretion, any defective product free of charge within this time period from the date of purchase:
Two years if the product is used for personal, family or household use.
This warranty extends to the original retail purchaser only and commences on the date of the original retail pur-
chase.
Any part of this product found in the reasonable judgment of Techtronic Industries North America, Inc. to be defective 
in material or workmanship will be repaired or replaced, without charge for parts and labor, by an Authorized Service 
Center for HUSKY

®

 brand pressure washers (Authorized HUSKY

®

 Service Center).

The product, including any defective part, must be returned to an Authorized HUSKY

®

 Service Center within the 

warranty period. The expense of delivering the product to the service center for warranty work and the expense of 
returning it back to the owner after repair or replacement will be paid for by the owner. Techtronic Industries North 
America, Inc.’s responsibility in respect to claims is limited to making the required repairs or replacements and no 
claim of breach of warranty shall be cause for cancellation or rescission of the contract of sale of any HUSKY

®

 brand 

pressure washer. Proof of purchase will be required by the dealer to substantiate any warranty claim. All warranty 
work must be performed by an authorized Techtronic Industries North America, Inc. service center.
This warranty does not cover any product that has been subject to misuse, neglect, negligence, or accident, or that is 
used for rental or commercial purposes, or that has been operated in any way contrary to the operating instructions 
as specified in the Techtronic Industries North America, Inc. operator’s manual. This warranty does not apply to any 
damage to the product that is the result of improper maintenance or to any product that has been altered or modified 
so as to adversely affect the products operation, performance or durability or that has been altered or modified so as 
to change its intended use. The warranty does not extend to repairs made necessary by normal wear or by the use 
of parts or accessories which are either incompatible with the HUSKY

®

 brand pressure washer or adversely affect its 

operation, performance or durability.
In addition, this warranty does not cover:
A. Tune-ups – Air filters, gas filters, spark plugs
B. Wear items – Hoses, connector fittings, spray nozzles, wheels, spray wand, detergent bucket, detergent tank
Techtronic Industries North America, Inc. reserves the right to change or improve the design of any HUSKY

®

 brand 

pressure washer without assuming any obligation to modify any product previously manufactured.
ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE STATED WARRANTY PERIOD. ACCORDINGLY, 
ANY SUCH IMPLIED WARRANTIES INCLUDING MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, 
OR OTHERWISE, ARE DISCLAIMED IN THEIR ENTIRETY AFTER THE EXPIRATION OF THE APPROPRIATE ONE-
YEAR,  WARRANTY  PERIOD.  TECHTRONIC  INDUSTRIES  NORTH  AMERICA,  INC.’S  OBLIGATION  UNDER  THIS 
WARRANTY IS STRICTLY AND EXCLUSIVELY LIMITED TO THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS 
AND TECHTRONIC INDUSTRIES NORTH AMERICA, INC. DOES NOT ASSUME OR AUTHORIZE ANYONE TO AS-
SUME FOR THEM ANY OTHER OBLIGATION. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN 
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. TECHTRONIC INDUSTRIES 
NORTH AMERICA, INC. ASSUMES NO RESPONSIBILITY FOR INCIDENTAL, CONSEQUENTIAL OR OTHER DAM-
AGES INCLUDING, BUT NOT LIMITED TO EXPENSE OF RETURNING THE PRODUCT TO AN AUTHORIZED HUSKY

®

 

SERVICE CENTER AND EXPENSE OF DELIVERING IT BACK TO THE OWNER, MECHANIC’S TRAVEL TIME, TELE-
PHONE OR TELEGRAM CHARGES, RENTAL OF A LIKE PRODUCT DURING THE TIME WARRANTY SERVICE IS 
BEING PERFORMED, TRAVEL, LOSS OR DAMAGE TO PERSONAL PROPERTY, LOSS OF REVENUE, LOSS OF 
USE OF THE PRODUCT, LOSS OF TIME, OR INCONVENIENCE, SOME STATES DO NOT ALLOW THE EXCLUSION 
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION 
MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
This warranty applies to all HUSKY

®

  brand pressure washer manufactured by Techtronic Industries North America, 

Inc. and sold in the United States and Canada.
To locate your nearest Authorized HUSKY

®

 Service Center, dial 1-866-340-391.

Содержание HU80722























Отзывы: