Husky HU80722, Руководство оператора

Страница: 15 / 22

15
OPERATION
WASHING WITH DETERGENT
See Figures 16 - 17.
Use only detergents designed for pressure washers; house-
hold detergents, acids, alkalines, bleaches, solvents, flam-
mable material, or industrial grade solutions can damage
the pump. Many detergents may require mixing prior to use.
Prepare cleaning solution as instructed on the solution bottle.

Remove the cap from the detergent container and pour
detergent in the container. Replace cap on container.

Install the Soap Blaster™ nozzle on the spray wand .

Spray the detergent on a dry surface using long, even,
overlapping strokes. To prevent streaking, do not allow
detergent to dry on the surface.
NOTE: To use a detergent bottle, open the detergent container
cap. Next, remove the filter from the end of the injection hose
then slide the hose out of the cap. Place the injection hose
filter back on the hose and place the hose in the bottom of
the bottle.
For long range detergent application:
With the
Soap Blaster™ nozzle installed on the spray wand
and the engine shut off, pull the nozzle up until it clicks into
place.
For short range detergent application:
With the
Soap Blaster™ nozzle installed on the spray wand
and the engine turned off, push the Soap Blaster™ nozzle
down as far as it will go.
DETERGENT
CoNTAINER
INjECTIoN
HosE
Fig. 16
Before shutting off the engine:

Place the injection hose in a bucket of clean water.

Flush for 1 - minutes (spray clear water through the
spray wand).

Shut off the engine .
NOTE: Shutting OFF ( O ) the engine will not relieve pressure
in the system. Pull trigger to release water pressure.
Fig. 17
LoNG
RANGE
sHoRT
RANGE