Husky H1301F Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 18

Husky H1301F Скачать руководство пользователя страница 6

6

7

SYMBOLS

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpre-
tation of these symbols will allow you to operate the tool better and safer.

Read The Operator’s Manual

Risk of Bursting

Risk of Fire or Explosion

SYMBOL

NAME

DESIGNATION/EXPLANATION

Voltage

Current

Frequency (cycles per second)

Type of current

Double-insulated construction

Do not expose to rain or use in damp locations.

To reduce the risk of injury, user must read and understand
operator’s manual before using this product.

Eye Protection

Always wear safety goggles, safety glasses with side shields, or
a full face shield when operating this product.

Precautions that involve your safety.

Do not spray flammable liquid in a confined area. Spray area
must be well ventilated. Do not smoke while spraying or spray
where spark or flame is present. Keep compressors as far from
the spraying area as possible, at least 15 feet from the spraying
area and all explosive vapors.

Wet Conditions Alert

Class II Construction

Hz

Hertz

A

Amperes

V

Volts

Hot Surface

To reduce the risk of injury or damage, avoid contact with any
hot surface.

Risk to Breathing

Air obtained directly from the air compressor should never be
used to supply air for human consumption.

Alternating Current

Safety Alert

Do not adjust regulator to result in output pressure greater than
marked maximum pressure of attachment. Do not use at pres-
sure greater than 135 PSI.

Risk of Electrical Shock

Hazardous Voltage: Disconnect from power source before ser-
vicing. Compressor must be grounded.

«
...
4
5
6
7
8
...
»

Содержание H1301F



















Отзывы:

Нет отзывов