manualshive.com logo in svg

Husky H1301F, Руководство оператора, Страница: 12 / 18

Поделиться
Скачать
Husky H1301F Скачать руководство пользователя страница 12

12

13

Fig. 3

Fig. 4

QUICK CONNECT 

COUPLER

HOSE

ATTACHING HOSE TO COMPRESSOR

See Figures 3 - 5.

n

  Make sure the air compressor is off and unplugged.

n

  Apply seal thread tape to both ends of the coil hose.

n

  Insert one thread end of hose into open end of female 

connector. Use wrenches to tighten securely.

 

NOTE:

  Be careful not to allow threads to become 

cross-threaded.

n

  Attach quick coupler to other end of hose and tighten 

securely. 

WARNING:

Do not attach air chuck or other tool to the open end of 
the hose until start-up has been completed.

n

  Firmly grasp the open end of the hose; hold facing 

away from yourself and others.

n

  Insert the female connector end of the coil hose into 

the desired air outlet on the air compressor. Push the 
connector firmly until you hear it click into place.

n

  To disconnect the hose, push the external ring nut of 

the quick coupler backward.

BREAKING IN THE PUMP

See Figures 5 - 6.

n

  Check and tighten all bolts, fittings, etc.

n

  Place the switch in the 

OFF 

position and plug in the 

power cord.

n

  Open the drain valve completely.

n

  Turn the air compressor 

ON (  l  ) 

and run the air com-

pressor for 10 minutes to break in pump parts.

n

  Place the switch in the 

OFF (  O  )

position.

n

  Close the drain valve.

ASSEMBLY

Fig. 6

Fig. 5

ON/OFF SWITCH

90 PSI

AIR

OUTLET

40 PSI

AIR OUTLET

RELEASED

PUSH TO 

RELEASE

HOSE

DRAIN VALVE 

LOCATED 

AT BOTTOM 

REAR OF AIR 

COMPRESSOR

SEAL THREAD

TAPE

COIL

HOSE

1/4 NPT FEMALE 

CONNECTOR FITTING

Содержание H1301F



















Отзывы:

Нет отзывов