16
WARNING:
Disconnect the tool from the air supply before clearing a
jammed fastener. Failure to do so could result in serious
personal injury.
CLEARING A JAMMED FASTENER
See Figure 12.
If a nail or fastener becomes jammed in the tool, disconnect
the air hose and keep the tool pointed away from you while
clearing the jam.
Disconnect the tool from the air supply.
Insert a flat blade screwdriver under jammed nail. Pry out
nail, use pliers if necessary.
Remove the bent fastener.
Use the flat blade screwdriver to push the driver blade to
its top position.
Reconnect the tool to the air supply.
Reinstall fasteners and close the magazine.
OPERATION
Fig. 1
