Husky C601H Скачать руководство пользователя страница 7

Страница: 7 / 28

HUSKYTOOLS.COM

Please contact 1-888-43-HUSKY for further assistance.

pts-205109-051012,

pts-2053019-053012,

pts-206067-060612

Warranty

HUSKY AIR COMPRESSOR LIMITED TWO-YEAR WARRANTY

This warranty covers defects in workmanship or materials in this Husky air compressor for

the two-year period from the date of purchase. This warranty is specific to this air compressor

model. Warranties for other Husky products may vary.
This warranty applies only to the original retail purchaser and may not be transferred. This

warranty does not cover normal wear and tear or any malfunction, failure or defect resulting

from misuse, abuse, neglect, alteration, modification or repair by other than a service center

authorized to repair Husky branded air compressors. Expendable materials, such as motor

brushes, seals, etc. are not covered by this warranty. This warranty does not apply to this

compressor used in industrial applications or for rental purposes. Husky makes no warranties,

representations or promises as to the quality or performance of its air compressors other than

those specifically stated in this warranty.

ADDITIONAL LIMITATIONS

To the extent permitted by applicable law, all implied warranties, including warranties of

merchantability or fitness for a particular purpose, are disclaimed. Any implied warranties,

including warranties of merchantability or fitness for a particular purpose, that cannot be

disclaimed under state law are limited to two years from the date of purchase. Husky is

not responsible for direct, indirect, incidental, special or consequential damages. If this air

compressor is used for commercial purposes, the warranty will apply for ninety (90) days from

the date of purchase. Some states do not allow limitations on how long an implied warranty

lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so

the above limitations may not apply to you. This warranty gives you specific legal rights, and

you may also have other rights, which vary from state to state.
Please contact the Customer Service Team at 1-888-43-HUSKY or visit www.huskytools.com.

Specifications

AIR COMPRESSOR

Running horsepower

3.7 HP

Air tank capacity

60 gal.

Air pressure

155 PSI max.

Air delivery

13.4 SCFM at 40 PSI
11.5 SCFM at 90 PSI

Lubrication

Oil Lube

Input

240 V, 60 Hz, Single Phase
AC only, 13.5 Amps.

Minimum Branch Circuit

Requirement

20A

Fuse Type

Time Delay

Net weight

218 lbs.

Duty Cycle

This air compressor pump is capable of running continuously. However, to prolong the life of

your air compressor, it is recommended that a 50% average duty cycle be maintained; that is,

the air compressor pump should not run more than 30 minutes in any given hour.

Содержание C601H





























Результаты поиска

Содержание C601H

Отзывы:

Похожие инструкции для C601H

Бренды по названию

Популярные бренды

Husky C601H, Инструкция по использованию и уходу

Результаты поиска

Содержание C601H

Отзывы:

Похожие инструкции для C601H

Бренды по названию

Популярные бренды