![Husky C10PRO-H-C-HU Скачать руководство пользователя страница 6](http://html1.mh-extra.com/html/husky/c10pro-h-c-hu/c10pro-h-c-hu_user-manual_2187792006.webp)
6
Standard Range C4PRO, C5PRO, C8PRO, & C10PRO
Operating Instructions
TO OPERATE THE ELECTRONIC THERMOSTAT
The thermostat has been pre-set, and in most cases it is not necessary to adjust the settings.
When the unit is operating normally, the display will show the current temperature.
To display the set temperature press the
button. Press the button again to return to
normal operation.
To set a new temperature, press
. The display will flash and the current set temperature
will be displayed. Press the
button to increase the set temperature, or press the
button to decrease the set temperature. Press the
button to save the new setting. The
display will flash with the new value and then revert to display the cabinet temperature.
Please note:
1. When the chiller is connected to the mains for the first time there will be a short delay
before cooling starts. During this time the Refrigeration Light will flash. After the short
delay, cooling will begin and the Refrigeration Light will be illuminated. When the chiller
reaches the set temperature, the Refrigeration Light will be off.
2. If you do not press any button, after six seconds the controller will return to its normal display.
To switch the chiller off, press
for six seconds. The display will show “- - -”. To switch the
chiller back on, press
for one second. The display will show the cabinet temperature and
the unit will enter normal working mode.
DEFROSTING
The unit defrosts automatically at preset intervals. If however the door is opened too often, or
if the unit is in a location with high humidity, or if the contents are changed more frequently, it
may be necessary to defrost the unit manually. To start or stop manual defrosting, press the
button for six seconds. The Defrosting Light will be illuminated. Melt water runs to a
container placed in the compressor compartment and evaporates. After defrosting is complete,
the unit will return to normal operation.
INTERIOR LIGHT
Press the
button to switch the light on or off.
EVAPORATOR FAN
As part of the chiller’s normal operation the evaporator fan will switch off automatically when
Technical Support: 01455 555340 (UK)
UK PRO upright manual 2016 EDITION 2.indd 6
22/12/2015 08:57