Husky AISLE SHIELD, Руководство по установке

Страница: 2 / 8

INSTALLATION OF OFFSET MOUNT
AISLE SHIELD
STEP 1: EYE BOLT ASSEMBLY STEP 1: EYE BOLT ASSEMBLY STEP 1: EYE BOLT ASSEMBLY STEP 1: EYE BOLT ASSEMBLY
HARDWARE REQUIRED:
FOR 4’ AND 5’ TALL PANELS SIX (6) EYE BOLTS
ARE REQUIRED PER PANEL.
FOR 3’ TALL PANELS FOUR (4) EYE BOLTS ARE
REQUIRED PER PANEL.
•
TAKE ONE OF EACH EYE BOLT, 3/8” REGULAR
NUT, 3/8” PLAIN WASHER, 3/8” LOCK TAKE ONE OF EACH EYE BOLT, 3/8” REGULAR
NUT, 3/8” PLAIN WASHER, 3/8” LOCK
WASHER AND 3/8” NYLOK NUT.
•
INSERT REGULAR NUT, PLAIN WASHER, LOCK
WASHER AND NYLOCK NUT RESPECTIVLEY IN
THAT ORDER AS SHOWN IN THE EYEBOLT
PICTURE TO THE LEFT.
•
MEASURE DESIRED OFFSET DISTANCE USING
TAPE MEASURE. MEASURE FROM BOTTOM
OF THE LOCK WASHER TO CENTER OF THE
EYE BOLT. USE WRENCH TO TURN THE
NYLOCK NUT TO ACHIEVE DESIRED OFFSET.
OFFSET
2