background image

storage

stOrInG YOur pOrtaBle aIr tanK

Turn the RED OPEN/CLOSE KNOB CLOCKWISE to the 

CLOSE position when storing your air tank.

Always drain the tank of all air after the last use for the day

and before repairing or removing any component parts.

Point the safety pressure relief valve AWAY FROM YOUR

BODY when releasing air. Use the pull ring on the safety

relief valve to vent any pressure inside the tank before

attempting to service the tank. Safety goggles must be

worn at all times for eye protection. To disperse any

accumulated condensation inside the tank, begin by 

reducing the air pressure inside the tank by pulling out on the 

safety valve and holding until the tank gauge reaches 25 psi. 

Invert the tank with the manifold facing downward and pull the 

ring on the safety relief valve. We as the

manufacturer and you as the consumer have no control

over the moisture content of air coming from any fill

source. Premature rusting caused by condensation inside

the tank is the primary reason for the suggested

replacement date stamped on the tank.

•   Never attempt to remove any components while tank is

  pressurized.

•   Never remove or deface the information sticker on tank.

•   Never attempt to fill the tank if any air leak is detected

    in the tank body. Discontinue use of the air tank 

    immediately.

•   Warranty is void if any attempt is made to alter or change  

  the design of the tank.

1. Carry Handle
2. pressure Gauge

    Indicates internal air pressure of tank.

3. Open/Close Valve

    Prevents air from leaking out of the air hose and/or tire 

    chuck, when in the close position.

4. Filler Valve

    Fill tank with compressed air through this point.

5. safety pressure relief Valve

    Prevents tank from being over-pressurized.

6. air Hose

    Delivers compressed air from the tank.

7. steel legs

    Support tank in an upright stable position.

8. tire Chuck

    Used to inflate tires and other items.

parts list

replacement parts

If within two years from date of purchase, this Husky product 

fails due to a defect in materials or workmanship, return the 

product to any Home Depot retail store with a receipt indicating 

proof of purchase for free repair (with replacement if repair is 

possible). This warranty only applies for 90 days from the date 

of purchase if this product is ever used in a commercial or rent-

al application. This warranty excludes incidental/inconsequen-

tial damages and failures due to misuse, abuse or normal wear 

and tear. This warranty gives you specific rights, and you may 

also have other rights, which vary from state to state. Please 

see store or call 1-888-859-4549.

limited Warranty

7

6

8

3

4

1

2

5

   

WarnInG 

Failure to remove condensation will cause the tank to rust 

prematurely.

Item no(s).

part no. 

Description

Qty.

2

E103747

Pressure Gauge

1

3, 4, 5

E100177

Manifold Assembly

1

6, 8

E104701

Air Hose w/Chuck

1

For replacement parts call 1-888-895-4549

Отзывы: