Husky 671-049, Руководство оператора

Страница: 6 / 44

Page 4
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the tool better and safer.
SYMBOLS
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequenct (cycles per second)
Alternating Current Type of current
Class II Construction Double-insulated constructon
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye Protection Always wear safety goggles or safety glasses with side shields
and, as necessary, a full face shield when operating this product.
Safety Alert Precautions that involve your safety.
Risk of Bursting Do not adjust regulator to result in output pressure greater than
marked maximum pressure of attachment. Do not use a pres -
sure greater than maximum rated pressure of compressor.
Risk of Fire or Explosion Do not spray flammable liquid in a confined area. Spray area
must be well ventilated. Do not smoke while spraying or spray
where spark or flame is present. Keep compressors as far from
the spraying area as possible, at least 15 feet from the spraying
area and all explosive vapors.
Risk of Electrical Shock Hazardous Voltage: Disconnect from power source before ser -
vicing.
Compressor must be grounded.
Hot Surface To reduce the risk of injury or damage, avoid contact with any
hot surface.
Risk to Breathing Air obtained directly from the air compressor should never be
used to supply air for human consumption.