Operation
Installing
the
drawers
□
Pull the
slides
and
slide
carrier
out until
fully
extended
.
□
Hold
the
slide
on
the
cabinet
while
aligning
it
with
the
slide
on
the
drawer
.
□
□
Slowly
push
the
drawer
until
it
is
fully
closed
to
engage
the
slide
.
□
Open
the
drawer
and
close
it
to
verify
proper
operation
.
Slightly insert one side and repeat for the other side.
3
2
Removing
the
drawers
□
Fully
extend
and
empty
the
drawer
.
□
Depending
on
the
slide
,
either
lift
or
lower
the
release
lever
on
both
sides
so
the
slides
can
ride
over
the
stops
.
Pull
out
to
remove
.
1
Locking
and
unlocking
the
unit
IMPORTANT
:
The
drawers
must
be
fully
closed
before
locking / unlocking
the
unit
.
□
To lock the unit, insert
the
key (J)
into the lock cylinder (K)
□
To unlock the unit, nsert
the
key (J)
into the lock cylinder (K)
J
and
turn
it
1/4-turn to
the
left. Then remove the key.
and
turn
it
1/4-turn to
the
right. Then remove the key.
9
Lifting/Lowering extendable side table
4
□
Lift the extendable side table (S) to raise into position and
□
Lower the extendable side table (S) when not in use. Pull it and
insert it’s supporting leg into the holder (R). Make sure it is
it’s supporting leg up first and let it down slowly.
locked to the mechanism
properly
.
S
S
HUSKYTOOLS
.
COM
Pleas
e contact 1-888-43-HUSK
Y fo
r furthe
r assistanc
.
e
