21
HUSKYTOOLS.COM
Please contact 1-888-43-HUSKY for further assistance.
Maintenance (continued)
7
Checking the air fi lter
□
Remove the nut (1) and the washer (2).
□
Remove the air fi lter cover (3) from the air fi lter base (5).
□
Remove and inspect the air fi lter element (4).
□
If the air fi lter element is dirty, replace it. Install a new fi lter
element. If the air fi lter element is clean, reinstall it.
□
Reattach the air fi lter cover (3).
□
Reattach the washer (2) and the nut (1). Do not overtighten
the nut as this maintenance process will be repeated
regularly. The nut (1) should be snug enough to hold the air
fi lter cover (3) in place.
MAINTENANCE SCHEDULE
WARNING:
Disconnect, tag, and lock out the power
source, and then release all pressure from the system
before attempting to install, service, relocate, or perform
any maintenance.
Operation
Daily
Weekly
Monthly
Every 3 Months
Check Oil Level
X
Drain Tank
X
Check Air Filter
X
Check Safety Valve
X
Clean Unit
X
Check Belt Tension
X
Change Oil
X
IMPORTANT:
Change oil after the fi rst fi fty (50) hours of
operation. Then perform oil changes every three (3) months.
Care and Cleaning
WARNING:
Disconnect, tag, and lock out the power
source, and then release all pressure from the system
before attempting to install, service, relocate, or perform
any maintenance.
□
Keep all surfaces clear of debris and dirt.
□
Do not attempt to clean the unit while running. Turn off the unit, disconnect it from the mains, and allow the unit to cool down.
□
Check the air fi lter weekly to see if it needs to be cleaned. Remove the fi lter element. Use hot, soapy water to clean the fi lter and allow
the fi lter to dry before reinstalling and returning the unit to active duty. Replace a fi lter that cannot be cleaned.
1
4
3
5
2
