5311_Installation Instructions. R1
HUSKY FLOOR LINER RETAINING CLIP INSTALLATION INSTRUCTIONS
YOUR NEW LINER SET INCLUDES OUR NEW FLOOR LINER RETAINING CLIP SYSTEM. THIS
RETAINING CLIP GIVES THE EXTRA SECURITY WHILE KEEPING SPILLS AND DEBRIS
TRAPPED INSIDE THE LINERS. TO INSTALL THE HUSKY® LINER RETAINING CLIPS,
SIMPLY FOLLOW THE INSTRUCTIONS BELOW:
1)
Pre fit your new Xact Contour floor liner in your vehicle (Image 1).
2)
Insert the screw-in carpet retention screw into the bottom of the Xact Contour liner
(Image 2).
3)
Press down on the liner to pre-mark the carpet screw into the carpet (Image 3).
4)
Screw the carpet screw into the carpet with a flat blade screwdriver (Image 4).
5)
Press the Xact Contour liner over the top of the carpet screw post (Image 3).
IF YOU HAVE ANY QUESTIONS REGARDING THE INSTALLATION OF YOUR HUSKY® LINER RETAINING
CLIPS, JUST GIVE US A CALL MONDAY THROUGH FRIDAY FROM 8:00 AM – 5:00 PM CENTRAL TIME AT
Image 1.
Image 2.
Image 3.
Image 4.
