HUSABERG FE 450 AUS, Руководство по ремонту

Страница: 63 / 285

07/FUEL TANK, SEAT, TRIM
61
100439-10
–
Remove the wash cap set. Oil the O-ring and connect plug-in connector

of the
fuel line.
Info
Route the cable and fuel line at a safe distance from the exhaust system.
100432-11
–
Position the top part of the subframe.
–
Mount and tighten screws

.
Guideline
Screw, subframe M8 30 Nm
(22.1 lbf ft)
100433-11
–
Mount and tighten screw

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Check that the intake trumpet and the connection of the engine housing vent are
clear.
–
Install the air filter. ( p. 57)
–
Install the spoiler. ( p. 61)
–
Check the fuel system for leakage.
10.5
Removing the spoiler
–
Remove the seat. ( p. 59)
100430-10
–
Remove screw

on the radiator.
–
Remove screws

on the fuel tank and take off the spoiler.
10.6
Installing the spoiler
100430-11
–
Position the spoiler. Mount and tighten screws

.
–
Mount and tighten screw

on the radiator.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Mount the seat. ( p. 59)