OPERATION INSTRUMENTS
- 9 -
WS (WHEEL SIZE)
The display will change and briefly show the diameter of the front
wheel in millimeters.
If the front wheel does not turn, the display will automatically
change to the SPEED/H mode.
If the front wheel turns, the display will automatically change to the
SPEED /ODO mode.
SPEED/H (HOURS) DISPLAY MODE
When you stop driving and no impulses are sent from the wheel
sensor, the display mode will automatically change from
SPEED/ODO to SPEED/H. H shows the operating hours. The ope-
rating hour counter starts to count as soon as you start the engine.
The displayed figure cannot be cleared.
Service intervals are indicated in operating hours for some
Husaberg offroad motorcycles, making the operating hour counter
a very practical function.
SPEED/ODO DISPLAY MODE
The SPEED/ODO mode shows the speed and the total kilometers
travled. When the front wheel stops turning, the display will auto-
matically change to the SPEED/H mode. The information will disap-
pear in the display when the front wheel stops turning for 1 minute.
NOTE:
A Tripmaster switch is available as an accessory and enhances the
electronic speedometer by providing the following functions:
2x Tripmaster
2x chronometer for the lap time
Average speed
Maximum speed
Clock
Display in miles
TRIPMASTER-SWITCH
The switch has three buttons: MODE, + (plus) and – (minus).
WARNING: Do not try to change the mode or read the
settings while driving. Your attention will be distracted
from the traffic which can easily lead to an
accident.
ELECTRONIC SPEEDOMETER FUNCTIONS PRO-
VIDED BY THE TRIPMASTER SWITCH
The display modes on the electronic speedometer will change in
the following order. If not, please read the chapter "ACTIVATING
AND DEACTIVATING THE DISPLAY MODE."
ENGLISH
+
–
MODE
