background image

5

2. Product safety

HURST products are developed and manufactured in order to guarantee the best 

performance and quality when used properly.  

Operator safety is the most important aspect of the product design. 

Moreover, the operating instructions are intended to help the safe use of HURST products. 

The generally applicable, legal and other binding regulations pertaining to the prevention of 

accidents and protection of the environment apply and are to be implemented in addition to 

the operating instructions.

The equipment may only be operated by persons with appropriate training in the safety 

aspects of such equipment – otherwise, there is a danger of injury occurring. 

We would like to point out to all users that they should read carefully the operating instructions 

and the instructions contained therein before they use the equipment, and that they should 

carefully follow such. 

 

We further recommend that a qualified trainer train you in the use of the product.

WARNING / CAUTION!

The operating instructions for the hoses, the accessories and the connected 

hydraulic equipment must also be observed!  

Even if you have already received instructions on how to use the equipment, you should still 

read the following safety notes through again. 

WARNING / CAUTION!

Ensure that the accessories and connected equipment used are suitable for 

the max. operating pressure!

Please ensure that no body 

parts or clothing get stuck 

between the visibly moving 

parts (e.g. spreader arms).

It is prohibited to work under 

load if this load is lifted 

exclusively by hydraulic 

equipment. If this work 

is absolutely imperative, 

additional mechanical 

supports must be used.

Wear protective clothing, 

safety helmet with visor, 

protective gloves

Inspect the equipment before 

and after use for visible 

defects or damage

The responsible department 

is to be informed immediately 

of any changes (including to 

the operating behaviour)! If 

necessary, the equipment is 

to be deactivated immediately 

and secured!

Inspect all cables, hoses 

and screwed connections for 

leaks and externally visible 

damage! If necessary, repair 

immediately! Squirting oil can 

result in injuries and fires.

Содержание SP 333





































Отзывы: