HUROM M100 Series, Инструкция по эксплуатации

Страница: 11 / 21

10 7. How to Use Blender
7-1. Manual Mode
Manual Mode 01: [ Min / Max ] Speed control dial
01. Check if the container in which ingredients are inserted is installed on the product body
and if the cover is closed.
* If it is not prepared, please refer to How to Assemble Blender on Page 06.
02. Turn the jog dial clockwise to operate the device at the desired speed.
Once cooking finishes, return the jog dial to the [Power Display Lamp] position.
* The motor stops automatically after max. 1 minute of operation.
Manual Mode 02: Pulse Mode
01. Check if the container in which ingredients are inserted is installed on the product body
and if the cover is closed.
* If it is not prepared, please refer to How to Assemble Blender on Page 06.
02. While the [START/STOP] button is pressed, the motor operates at the maximum speed.
Once the button is released, the operation stops and it switches to the Standby (stop) state.
* The motor stops automatically after max. 1 minute of operation.
※ Warning
Do not remove the container until the blades stop rotating completely and the speed control dial returns to the
[ Power Display Lamp ] position.
Once the container is detached from the product body while the speed is being controlled,
the Operation Display Lamp on the body is turned off and the motor stops.
As soon as the container is re-installed on the product body, the Power Display Lamp on the body blinks.
For a normal operation again, return the speed control dial to the [ Power Display Lamp ] position.
Then, the machine will operate normally again.
01 01
01 01
02 02
02 02
⑧ ⑧
⑨ ⑨