Version September 2018
18
EN
HÜRNER HST 300 Print 315 2.0 User’s Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
period of validity 2 years from code issuance), or the
welding operation cannot be started, “off,” that the
validity of the code is not checked at all.
“Memory Control on” means that when the system
memory is full of reports, the unit will be blocked until
the reports are printed or downloaded, “off,” that it
works but that the oldest report will be overwritten.
“Manual Input on” means that the manual input of weld-
ing parameters (see Sect. 7) is possible, “off,” that the
manual input is not allowed.
“Welder Code Options – M – ” means that by pressing the
MENU key, the user can access a sub-menu that allows
determining when the welder code, if it is enabled at
“Recording,” has to be entered:always, i. e. before evey
single welding operation, only before the first welding
operation after switching the unit on or only after the
first welding operation of a new day/date.
“Language – M – ” means that by pressing the MENU key,
the user can access a sub-menu for selecting the display
and report language (see Sect. 10.1.1).
“Date/Time – M – ” means that by pressing the MENU key,
the user can access a sub-menu for setting the clock
(see Sect. 10.1.2).
“Buzzer Volume – M – ” means that by pressing the MENU
key, the user can access a sub-menu for setting the
volume of the status buzzer (see Sect. 10.1.3).
“Temperature Unit – M – ” means that by pressing the
MENU key, the user can access a sub-menu for select-
ing centigrade or Fahrenheit as the unit for the tem-
perature.
“Number of Tags – M – ” means that by pressing the
MENU key, the user can access a sub-menu for entering
the number of tags that are printed automatically after
welding with the optional label tag printer if such a
printer is connected.
10.1.1 Selecting the Display Language
When the “Select Language” sub-menu was selected, the
screen changes and the display reproduced in Display 16
appears.
Use the arrow keys
ñ
and
ò
to select one of the options,
“Deutsch,” “English,” “Français,” etc. and confirm by press-
ing the START/SET key.
10.1.2 Setting the Clock
When the “Set Clock” sub-menu was selected, the screen
changes and the display reproduced in Display 17 appears.
The time of day and the date can be set using the keypad.
Display 13
*** SET-UP MENU ***
>Check Cd Expiry off
Memory Control on
Manual Input -M-
Display 14
*** SET-UP MENU ***
Wldr Code Option-M-
>Language -M-
Date/Time -M-
Display 15
*** SET-UP MENU ***
Buzzer Volume -M-
>Temp. Unit -M-
Number of Tags -M-
Display 16
***** LANGUAGE *****
>Deutsch
English
Francais
Display 17
Date/Time
21.06.13 14:28
