HURNER HCU300, Руководство пользователя

Страница: 37 / 69

Version August 2017
EN
15
HÜRNER HCU 300 User’s Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
USB A Interface Port
for connecting USB mass storage media (such as a
memory stick)
The interface port complies with the USB version 2.0
specification (i.e., maximum data rate of 480 megabits
per second).
Important
Before transferring data, it is highly recommended
to switch the welding unit off and on again. If this
fails to happens, there is a risk of data transfer
failure, or reports in the welding unit may be cor-
rupted.
Important
When transferring welding reports to a USB stick,
always be sure to wait until the display shows the
“Download finished” message before you discon-
nect the USB stick from the product. If you discon-
nect it too early, the unit may ask you whether you
want to delete the reports in memory, although
they were not properly transferred. In this case,
if you delete the contents of the report memory,
the welding reports would be irrevocably lost and
would not be available elsewhere either.
8.1 Selecting the File Format
Connecting the printer or storage media causes the the
screen to appear in which the format of the output file
with the welding reports can be selected: a PDF file with an
abstracted or extended version of the report or the format
of the welding data management application DataWork.
Using the
ñ and ò arrow keys, select the file type you need
and confirm your selection by pressing the START/SET key.
The Service Report option is not important for normal op-
eration. This report lists the events related to the service
and maintenance of the welding unit.
8.2 Downloading All Reports
After the file type was selected, the next screen offers a
“Print All Reports” option. Selecting it will download all
welding reports currently in system memory in the previ-
ously selected file format.
8.3 Downloading by Commission Number, Date or
Report Range
After the file type was selected, the next screen offers a
“By Commission Number,” a “By Date Range,” and a “By
Display 12
Select File Type
DataWork File
>PDF Abstract
PDF Ext'd Report