Getting started instructions for Tracker 3200S and 4.3 Software
21-2615 Version 1.1
3
Do
not click the Verify Hardware button
. This routine requires special hardware and
test procedures.
Click the
Alignment
button. Ensure that all cables are connected. The calibration routine
will run for a few minutes. Do not power off any of the instruments during this process.
After a successful calibration, click the
Verify Alignment
button. If you get a “successful
verification”, click
Close
to exit the Diagnostic window. If you get a “Verification Failed”
message, Re-run the
Alignment
routine and run the
Verify Alignment
again. If it still
fails, call Huntron Technical support.
Return to Tools->Options->Hardware and click the Connect button(s) for the appropriate
hardware.
1-5 Follow the software tutorial.
A software tutorial is included in the software DVD Documents folder and in the default
installed folder (
C:\Program Files\Huntron Workstation 4.3\Documents
). The tutorial
can also be accessed via the Help menu in the software. If you purchased an Access
Prober follow the Workstation Tutorial.pdf, otherwise follow the Workstation Tutorial
Tracker 3200S.pdf. The tutorial will enable a new user to get acquainted with most of the
software features. The help menu in the software will also assist you.
Whenever you need detailed information, click
Help
in the appropriate screens.
All
user’s manuals
are located in the Manual CD (06-5217) included in your package.
Use the Tracker 3200S Manual.pdf file to view or print the manual.
If you need further assistance, call the Huntron Technical support at
1-(800)-426-9265 or (425)-743-3171
email: [email protected]
--------end of document--------
