19
19
Huntington Fireplaces Ltd., #720 - 999 West Broadway., Vancouver, BC, V5Z 1K5 Canada
Toll Free #1-877-856-4766. www.huntingtonfireplaces.com. [email protected]
E N
E N
B
:
Control Panel Operation
BUTTON
FUNCTION
ACTION INDICATION
POWER
ON: Enables control panel functions and remote
control. Turns on flame effect.
OFF: Disables control panel functions and remote
control turns off flame effect.
1. Press once. Indicator light tums on.
Power turns on. All functions enabled.
2.
Press again. Flame effect tums off. Unit
goes to standby. All functions turn off.
TEMP
1. Press once: Touch panel indicator becomes active
2. Press again until desired setting is reached. Digital display shows setting circles as belows.
NO
NO
00
11
22
33
44
55
66
77
88
99
10
10
N
N
℃
℃
20
21
22
23
24
25
26
27
28
29
30
C
℉
℉
68
70
72
74
76
78
80
82
84
86
88
F
69
71
73
75
77
79
81
83
85
87
TIMER
TIMER button: Controls timer settings to turn off
fireplace at selected time.
Settings range from 0.5 hours to 8 hours.
1. Press once. Indicator light turns on.
Timer is set to 0.5 hours.
2. Press again until desired setting is
reached. Indicator lights show setting.
HEATER
HEATER button: Turns heater on and off
1. Press once. Indicator lights up. Fan
blows cool air for 10 seconds. 750W
heater turns on and blows warm air.
2. Press again. Indicator lights up. 1500W
heater turns on and blows hot air.
3. Press again. Heaters turn off. The fan
blows cool air for 10 seconds to allow
heater to cool down, then turns off.
FLAME
COLOR
Flame color button: Makes the color flame effect
changing.
1. Press once. Flame color effect gets
changing.
2. Press again until desired setting is
reached. In total 6 colors for flame. The
color effects are 1. Orange. 2. Blue.
3. White. 4. Mix of orange and blue.
5. Mix of white and orange. 6. Mix of
white and blue.
FLAME
BRIGHTNESS
FLAME button: Makes flame effect dimmer and
brighter.
1. Press once. Indicator light turns on.
Flame brightness effect gets changing.
2. Press again. until desired setting is
reached. F1 is dimmest flame. F5 is
brightest flame.
Press the button for 5 seconds to switch between℃ and ℉
note:
note:
TO Prevent overheating the heater fan will blow
cool air for 8-10 seconds before the heater turns
on,and after the heater turns off.
note:
note:
Color effect stays on until power button is turned
off. Color flame effect must be on for heater to
turn on.
This fireplace has memory function for flame.
note:
note:
Flame effect stays on until power button is turned
off. Flame effect must be on for heater to turn on.
note:
note:
