HunterLab Agera, Руководство пользователя

Страница: 37 / 91

User’ s Manual for Agera and EasyMatch Essentials v 1.0
37
•
PROMPT FOR SAMPLE/STANDARD NAME
Select this feature to input the Sample (or Standard) name manually during the
measurement cycle so that the Sample measurement will be inserted with the specified
name. If this option is not selected, the Samples will be inserted with the specified default
sample name suffixed with the auto incremented index number. Press
APPLY when done.
Figure 45. Prompt for Sample (Standard) Name
Figure 46. Input Sample Name
Read Options > Measurement Configuration
•
UV Mode
Agera uses LEDs to determine UV-nominal, UV-excluded and UV-calibrated. UV compare will
take two measurements automatically; one by UV-excluded mode and UV-calibrated mode
for one sample. Both measurements will be saved with the same name. If the Image View is
captured, the sample image will be saved for both measurements. The procedure is to
standardize in 2 modes
– one with the UV-excluded and one with the UV-calibrated. In this
way, a numerical value for the ultraviolet contribution can be documented. To begin, select
UV STATUS from the Status bar or go to WORKSPACE > READ OPTIONS > MEASUREMENT
CONFIGURATION .