HunterDouglas Pleated Standard LiteRise, Установка Эксплуатация Уход

Страница: 14 / 16

CARE
12
Removing the Shade (If Necessary)
■
Lower the shade approximately 4".
■
While holding the headrail, push
back on the bottom tab of
the installation bracket to
release the bottom edge of
the headrail.
■
After releasing the bottom
edge, roll the back of the headrail
down and out from the bracket.
Cleaning Procedures
Pleated shades are made of an anti-static, dust-resistant fabric which repels dirt and dust. For
most fabrics, the following options are available if your shade needs cleaning.
Dusting
■
Regular light dusting with a feather duster is all the cleaning that is needed in most
circumstances.
Vacuuming
■
Use a low suction, hand-held vacuum for more thorough dust removal.
Spot-Cleaning
■
Prepare a solution of warm water and a mild detergent.
■
Dampen a clean cloth in the solution and wring it out.
■
Dab the spot with the dampened cloth until it is gone. Do not rub the fabric.
■
Allow the shade to dry in the completely lowered position.
Bottom
Tab
Back of
Shade
Headrail
Bracket