HunterDouglas Pleated Standard LiteRise, Установка Эксплуатация Уход

Страница: 11 / 16

INSTALLATION
9
Install the LiteRise
®
Handle
Using the LiteRise
®
handle provides touch of finger ease and
convenient shade operation.
Important: For shades over 60" wide, two handles will be
provided. Space these handles evenly across the rail.
■
Attach the handle at the center of the bottom rail.
➤
Hook the prongs of the handle onto the lip of the bottom rail.
➤
Rotate the handle down until it snaps onto the bottom rail.
Level the Bottom Rail (If Necessary)
■
Lift the bottom rail to locate the pockets on the underside
of the rail.
■
Gently pull down on the bottom rail to fully insert the
7
/
64
"
Allen wrench key into the pocket. The key is fully inserted
when the ring on the key abuts to the pocket.
➤
Lift up the bottom rail slightly before turning the Allen
wrench key. Turn the key clockwise to raise that side
of the bottom rail, or counter-clockwise to lower it.
➤
One quarter turn of the key equals approximately ¼".
Important:
The Allen wrench key must be fully
inserted to avoid stripping the mechanism. Do not pull
down on the bottom rail while turning the key.
■
If there are more than two pockets, adjust the outer pockets first. Then adjust inner pockets
as necessary to maintain equal tension across the bottom rail. As pocket adjustments are
made, raise and lower the shade to check that it is level.
Handle
Front of
Shade
Bottom Rail
Pocket
Underside of Bottom Rail
Allen Wrench
Lower
Raise