INSTALLATION
12
Cord Adjustment
NOTE:
Cord length and/or tension cannot be adjusted for PermaTilt
®
Wand Control System. It
is set in the factory to help ensure that the product meets cord safety standard.
To reduce cord length on a Side Draw Blind:
■
Open the blind.
■
Release the cord tensioner by removing the screws.
■
Locate the cord knot in the front of the
lead carrier.
■
Pull the cord to the desired length.
■
Tie a double knot.
■
Re-install the cord tensioner with the screws.
■
Test for proper cord tension.
■
Cut the excess cord.
To reduce cord length on Center Draw Blinds:
■
Release the cord tensioner by removing the screws.
■
Place the blind in the closed position.
■
Locate the cord ends in the front of the lead carrier.
■
Select the cord knot that adjusts the cord length only; if carrier movement is observed,
select the other cord.
CAUTION:
Cutting the wrong cord will cause irreparable damage.
■
Pull the cord to the desired length.
■
Tie a double knot.
■
Re-install the cord tensioner with the screws.
■
Test for proper cord tension.
■
Cut the excess cord.
Side Draw Carriers
in the Open Position
Cord Knot
Center Draw Carriers
in the Closed Position
Cord Knot
