HunterDouglas EverWood Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 36

background image

DECLARATIONS

33

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/tv technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance

could void the user’s authority to operate the equipment.

ICES-003

This Class B digital apparatus complies with Canadian ICES-003.
• Operation is subject to the following two conditions: (1) this device may not cause harmful interference

and (2) this device must accept any interference received, including interference that may cause

undesired operation.

NMB-003

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
• L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit

pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage

radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du

dispositif.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and (2) this device must accept any interference

received, including interference that may cause undesired operation.

CE Statement

Hunter Douglas Window Fashions, One Duette Way, Broomfield, CO 80020, USA
Hunter Douglas hereby declares that the PV40 is in compliance with the essential requirements and other

relevant provisions of Electromagnetic Compatibility (EMC) Directive 2014/30/EU and Radio Equipment

Directive (RED) 2014/53/EU. A copy of the DoC can be obtained online:

www.hunterdouglas.com/RFcertifications

«
...
33
34
35
36
»

Содержание EverWood





































Отзывы:

Нет отзывов

Похожие инструкции для EverWood

SPECIALTY VENETIAN BLINDS

Бренд: horiso Страницы: 2

Бренд: YewdaleDefiant Страницы: 8

Бренд: SCREENLINE Страницы: 25

Бренд: IKEA Страницы: 4

Бренд: John Lewis Страницы: 3

FAUX WOOD VENETIAN BLIND

Бренд: John Lewis Страницы: 5

Corded roman blind kit

Бренд: John Lewis Страницы: 4

Бренд: Diaz Страницы: 3

Бренд: Diaz Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды