HunterDouglas EasyRise, Установка Эксплуатация Уход

Страница: 19 / 24

CARE
17
Removing the Shade (If Necessary)
■
Fully raise the shade.
■
While holding the headrail, place the
flat blade screwdriver on the installation
bracket’s locking tab.
➤
Insert the screwdriver between the
arrows on the bottom tabs.
■
Push up to release the shade.
IMPORTANT:
On longer shades, you
might need to lower the shade slightly to
access the locking tab.
Cleaning Procedures
Vignette
®
Modern Roman Shades are made of an anti-static, dust-resistant fabric which repels
dirt and dust. For most fabrics, the options below are available if your shade needs cleaning.
Dusting
■
Regular light dusting with a feather duster is all the cleaning needed in most circumstances.
Vacuuming
■
Use a hand-held vacuum with low suction for more thorough dust removal.
Compressed Air / Hair Dryer (Cool Setting)
■
Blow dirt and debris from within the fabric folds using clean, compressed air.
Spot-Cleaning
■
Prepare a solution of warm water and mild detergent.
■
Dampen a clean cloth in the solution and wring it out.
■
Place a dry, clean cloth behind the spot between the face fabric and the back fabric.
■
Dab the spot with the dampened cloth until it is removed. Non-oil-based baby wipes may be
used on more stubborn stains. Do not rub the fabric.
■
Allow the shade to dry in the completely lowered position.
Push
Up
Locking
Tab
Arrows