HunterDouglas EasyRise, Установка Эксплуатация Уход

Страница: 10 / 24

INSTALLATION
8
■
Drill the screw holes using a
3
/
32
" drill bit.
CAUTION:
Use drywall anchors when mounting
into drywall.
■
Attach the installation bracket using the screws
provided.
IMPORTANT:
The front edges of the installation
brackets must be level and aligned to each other.
■
If using spacer blocks, attach the spacer
block(s) and installation bracket to a flat vertical
mounting surface with #6 mounting screws long
enough for a secure installation.
➤
A maximum of 1
1
/
2
" of spacer blocks per
installation bracket is recommended.
Proceed to “Install the Shade” on page 9.
Mount the Installation Brackets — End Mount
End mount the headrail when conventional mounting
techniques will not work — for example, in an
arched window.
■
Mount the extension brackets on a surface at
least 1
1
/
2
" wide.
➤
The top of the extension brackets should be
at the desired shade height. The brackets
should be level and aligned.
CAUTION: The rear of the extension
brackets must be flush against a flat
mounting surface. Do not mount the
extension brackets on the curve of the
arch opening.
■
Attach the installation brackets to the underside of the extension brackets using the
provided screws and speed nuts.
CAUTION:
Both brackets must be installed at the same depth and height.
Proceed to “Install the Shade” on page 9.
3"
Spacer
Blocks
Longer
Screws
1
1
/
2
"
Minimum
Speed Nuts
Screws