click
1
2
2
1
1
16
15
17
18
19
20
22
21
25
26
24
23
REV 01 August`11
1
2
3
Slide the end caps onto the brackets.
Install the lower leveller and roller blind after hori-
zontal adjusting of the upper blind. The integrated
leveller is already installed in the bracket.
Slide a screw driver between bearing plug and
bracket and push the bearing in the clutch direc-
tion.
Place the screw driver under the end cap, turn
the screw driver and slide the end cap from the
bracket.
and pull it outwards (2).
Removal
Move the blind downwards out of the bracket.
Outside:
Push the pin of the clutch and take the
clutch out of the bracket. Loosen the screws of the
chain outlet set and remove the upper clutch in the
same way.
