Hunter TCX575 Скачать руководство пользователя | Manualshive

Страница: 39 / 48

background image

Operation Instructions for TCX575 Tire Changer

4. Maintenance, Calibration and Replacement Parts



31

4. Maintenance, Calibration and

Replacement Parts

4.1 Maintenance Schedule

CAUTION:

Do not hose down or power wash electric tire changers.

Proper care and maintenance are necessary to ensure that the TCX575 operates
properly. Proper care will also ensure that rims and tires are not damaged during the
mount/demount process.

Maintenance Schedule

Perform the Following

Maintenance

Daily

Drain condensation from pressure regulator
reservoir by pressing in on the fitting located on
the bottom of the regulator.

Check for worn or damaged rubber and nylon
components that should be replaced to prevent
damage from occurring. Replace worn parts as
needed (tool supports, rubber pads, lever protector
sleeve and mount/demount head).

Clean all areas that contact rims or tires to prevent
possible scratching to rim.

Weekly

Clean tire changer with shop towels or a vacuum
cleaner.

Do not clean with or use compressed

air, which can blast dirt between moving parts.

Do not use cleaning solvents to clean pressure
regulator/oiler.

Periodically

Refill the pressure regulator/oiler using

only

Hunter Lubri-Oil, 148-133-2, as needed.

Petroleum-based oils should never be used in
the oiler and may void all warranties.

Adjust the oiler to release one drop of oil every
three rotations of the clamping table by adjusting
the screw on top.

Check for loose bolts and tighten per
specifications.

«
...
37
38
39
40
41
...
»

Содержание TCX575

















































Отзывы:

Нет отзывов

Похожие инструкции для TCX575

Бренд: Panasonic Страницы: 64

Бренд: pewag Страницы: 52

Бренд: Coast Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды