3
1886
1886
Ceiling Bracket
Hanging Fan
Wiring
Motor Housing
Blades
Light
Control
Choosing the Right Installation Location
You probably bought this fan with a location in mind. Let’s check below to make sure it is a good fit.
Check the room dimensions:
Check the outlet box:
You must be able to
secure the fan to building
structure or fan-rated
outlet box.
30 inches
from blade tip to
nearest wall or
obstruction
7 feet
from bottom edge
of blade to the
floor
Installing the Ceiling Bracket
You have two options for installation. Pick which one works best for your location.
Use wood screws (included)
when securing to support
structure with approved
electrical outlet box. Drill 9/64”
pilot holes in support structure
to aid in securing ceiling bracket
with hardware found in the
hardware bag.
Use machine screws (pro-
vided with outlet box) when
securing to existing ceiling
fan-rated outlet box. Make
sure it is securely installed
and is acceptable for fan
support of 31.8 kg (70 lbs)
or less.
Option 2:
Wood Screws
Option 1:
Machine Screws
OFF
Turn P
ow
er
Do this first!
The machine screws are the
ones that came with your
outlet box.
Hunter Pro Tip:
bag
Wood Screw
Washer
WARNING
To avoid possible electrical shock, before
installing your fan, disconnect the power by
turning off the circuit breakers to the outlet
box associated with the wall switch location.
x2
x2
Ma
ke
s
ur
e
a
ll
f
ou
r
bu
m
p
e
r
s
a
re
s
til
l
a
tt
a
ch
ed
.
Hanging the Fan
1
STEP
2
STEP
While holding the wires out of the way, lift the
motor assembly and place the square hanger
into the opening in the ceiling bracket. Be sure
the ground wire attached to the hanger faces
out of the large opening in the ceiling bracket.
Once the motor is in the ceiling bracket,
use the two locking screws found in the
hardware bag to secure the motor
to the ceiling bracket.
x2
bag
Locking
Screw
NOTICE
To prevent damage to fan,
ALWAYS lift holding either the
fan housing or the downrod.
