background image

www.HunterFan.com

1.888.830.1326

Wiring (continued)

Turn the splices upward and push them carefully back through the hanger bracket 

into the outlet box. Spread the wires apart, with the grounded wires on one side of 

the outlet box and the ungrounded wires on the other side of the outlet box.

Refer to CAUTION c.1 on pg. 2 

Note: 

If you have a dual switch, 

please cap the secondary power 

wire from the ceiling. This will 

result in one unused switch.

 

FR

OM RECEIVER

black

blue

yello
w

blue 

Using the orange 

wire connectors 

from the remote 

control hardware 

bag, connect the blue 
wire from the receiver 

to the blue wire (or 
possibly black with 

white stripe wire) from 

the fan. Connect the 
yellow wire from the 
receiver to the black 

wire from the fan. 

FROM FAN

FRO

M RECEIVE

R

Using the orange wire 

connectors from 

the         hardware bag, 

connect the black wire 

(ungrounded) from 

the ceiling to the black 

wire from the receiver. 

Connect the white 

wire (grounded) from 

the ceiling to both the 

white wire from the 

receiver and the white 

wire from the fan. 

 

FR

OM CEILING

black 

(ung

rounded)

whit

e (g
rounded)

black

whit

e

FRO

M FAN

white

9

M3608-01 • 05/09/16 • © 2016 Hunter Fan Company

Содержание M3608-01



















Отзывы: