8”
3/8”
CU
T
&
ST
R
IP
(not to scale)
Using the provided Allen
wrench, loosen the setscrew on
the adapter to install the pipe
and ball assembly.
Insert the downrod through the
adapter cover. Hand tighten the
downrod (at least 4-5 full turns)
until it stops.
The wires can be cut, but
leave at least 8” extending
from the top of the downrod.
Downrod (continued)
8”
3/8”
Use the Allen wrench to
securely retighten the setscrew.
If the setscrew is not tightened
securely, the fan may fall.
Note: The adapter cover is not
used for low-profile mounting.
7
M3519-01 • 05/14/14 • © Hunter Fan Company
