44204-01
05/30/2007
gatHeriNg tHe tools
You need the following tools to in-
stall the fan:
• Standard screwdriver
• Phillips-head screwdriver
• Wrench or pliers
prepariNg tHe FaN site
Reliable operation, efficiency, and
maximum energy savings depend
upon proper placement and attach-
ment of the fan. This fan should be
installed on a previously installed
J-Hook or U-Hook.
step 1 - gettIng ready
CHeCkiNg Your FaN parts
Carefully unpack your fan parts to
avoid damage. Check for shipping
damage. If one of the fan blades
is damaged, return all blades for
replacement.
Hint:
If installing more than one fan,
keep the fan blades in sets, as
shipped.
Standard Mounting
(Figure 1) hangs
from the ceiling by a connector
pipe (included), for ceilings 2.3 m
or higher. For ceilings higher than
2.3 m.
Figure 1 - Standard Mounting
