manualshive.com logo in svg

Hunter H45DS, Руководство оператора

Операторская инструкция Hunter H45DS доступна для бесплатного скачивания с нашего сайта. Получите подробное руководство по эксплуатации вашего устройства, включая все необходимые инструкции. Не теряйте время, загружайте инструкцию прямо сейчас с manualshive.com.

Поделиться
Скачать
background image

Hunter 45DS • AC Electric

8.2

The AC System consists of the following  systems or 
components:

Shore Power Connection
Shore Power Breaker
Isolation Transformer
Generator (Optional)
MDP
Breakers
Components

Important:  The AC system is connected to the living quarters of 
your boat through an AC junction panel located on the Port side 
behind the cabinets in the Salon area.  See the AC Mechanical 
Arrangement for further location details.

WARNING

!

!

specialized test equipment. Never think you know

whether a circuit is “live”.  Always have qualified, 

competent professionals inspect or make repairs to

your electrical systems.

Throughout this section, the components will be sepa-
rated into categories of Power Supply and related com-
ponents such as switches, breakers, fuses, panels, char-
gers,  grounding and bonding, the components that are 
powered by the AC electrical system, and finally, opera-
tions and suggestions for control or usage of the systems
or components.  At the end of the section, you will find a
“Legends” section that will detail the switch, breaker, and 
control panels aboard your boat.

The sources for power supply in your AC electric system
are the shore power, the generator, and AC electric sup-
plied through the inverter. We will explain both systems
as if your boat came to you with a generator installed.  If 
you opted not to have the generator, then simply omit the
sections that deal with that part of the boat.  They will not 
apply to your boat.

Note:  It is important that you review the “Electric Shock” pam-
phlet included with your manual and understand the importance 
of electrical safety.  While electricity is one of our greatest 
friends, it can well be your worst enemy.  Be sure and follow 
the warnings posted in this manual and your component or 
systems manuals in your owner’s packet and practice good 
safety.  Always have trained, competent technicians to service 
your electrical systems, it could mean your life. 

•
•
•
•
•
•
•

8.1  Power Supply Components

As we mentioned, the two main sources for AC power 
are the shore power and the generator.  There is a rocker 
switch on the control panel that allows you to switch 
between the two power sources without energizing both 
at once.

The AC power supplied in the boat is provided by a 
main breaker located in the aft cabin starbaord side. The
branch breakers are in the MDP located port main salon
behind aft seatback.

DANGER

!

!

Never work on an energized circuit!  Always treat 

any circuit as if it were live!  Always have trained,

competent technicians to service your electrical

systems!

8.1.1  Shore Power Supply

Your boat has a shore power inlet, two if you ordered your 
boat with air conditioning. A 30 amp 120 volt line supplies
power to the AC MDP.

WARNING

!

!

Using a damaged or improper cord for shore power 

can cause electrical shock and serious injury.  Use a

cord specifically designed for shore power connec-

tion.  Do not use a household extension cord.

CAUTION

!

!

Water is an excellent conductor of electricity.  Keep

shore power cord out of water.  Do not operate any 

AC device while you or the cord are in the water.  To

prevent injury or equipment damage, keep all AC 

system components dry.

WARNING

!

!

DO NOT connect the shore power cord to the dock-

side electrical source first. You could accidentally 

drop the cord into the water, which may result in 

electrical shock and serious personal injury.

Содержание H45DS



















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для H45DS

Sportsman Tournament 214 SBX Owner'S Manual And Quick Reference Manual preview
Tournament 214 SBX
Бренд: Sportsman Страницы: 38
Walker Bay WB 8S Owner'S Safety Manual & Assembly Instructions preview
WB 8S
Бренд: Walker Bay Страницы: 13
Williams DIESELJET Owner'S Handbook Manual preview
DIESELJET
Бренд: Williams Страницы: 134
Banzai 15733 Instructions Manual preview
15733
Бренд: Banzai Страницы: 10
Supra COMP ts6m 1989 Owner'S Manual preview
COMP ts6m 1989
Бренд: Supra Страницы: 89
BRIG E580 Owner'S Manual preview
E580
Бренд: BRIG Страницы: 36
Malibu Boats 2002 Response Series Owner'S Manual preview
2002 Response Series
Бренд: Malibu Boats Страницы: 76
Lagoon 440 Information & Operation Manual preview
440
Бренд: Lagoon Страницы: 30
Nautiraid CORACLE 250 Instruction Book preview
CORACLE 250
Бренд: Nautiraid Страницы: 8
hsr-benelli S-series Service Manual preview
S-series
Бренд: hsr-benelli Страницы: 215
Yamaha WaveRunner GP760W Owner'S Manual preview
WaveRunner GP760W
Бренд: Yamaha Страницы: 120
Jeanneau 39i Operation Manual preview
39i
Бренд: Jeanneau Страницы: 9
boAt Sun Marine Frp-330 Quick Start Manual preview
Sun Marine Frp-330
Бренд: boAt Страницы: 3
Wayland Folding Kayaks MK II -550 Assembly Instructions Manual preview
MK II -550
Бренд: Wayland Folding Kayaks Страницы: 9
Bancroft Focus II Assembly And Operating Manual preview
Focus II
Бренд: Bancroft Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды