Hunter e36 Скачать руководство пользователя страница 100

Страница: 100 / 210

Hunter e36 • DC Electric

7.8

tery switch panel supplies power to the optional windlass

on your boat. The windlass (shown in Fig. 7.5) offers you

the ability to raise and lower your anchor.

7.3.11.1 To operate the windlass:

Lower Anchor

1. Turn on battery switch.

2. Turn on windlass breaker at DC Panel.

3. Push windlass “Down” button on nav station.

Note: “Bump” switch until anchor clears anchor roller and

hull before letting anchor down freely.

Raising Anchor

1. Start boat engine, this will allow control of boat when

anchor becomes free, as well as reducing load on bat-

tery.

2. Push windlass “Up” button being careful as the anchor

approaches the hull and anchor roller. Continue until the

anchor rests in the stemhead properly.

Note: If it appears there is no power to the windlass,

check reset breaker in stbd. aft cockpit locker. If windlass

becomes inoperable electrically, a manual winch handle

is supplied.

For more information about your windlass, refer to your

owner’s manual.

Figure 7.5

7.3.12 Instruments

The breaker marked “Instruments”, on the 12 Volt DC

Panel supplies power to the instruments on your boat.

For more information about the controls of your instru-

ments consult product manual in your owner’s packet.

7.3.13 GPS (optional)

The breaker marked “GPS”, on the 12 Volt DC Panel

supplies power to the chart plotter on your boat. For

more information about the controls of your instruments

consult product manual in your owner’s packet.

7.3.14 TV/DVD (optional)

The reset marked “TV/DVD”, on the 12 Volt DC Panel

supplies power to the TV/DVD on your boat. For more

information about the controls of your instruments con-

sult product manual in your owner’s packet.

7.3.15 Head (optional)

The breaker marked “Head”, on the 12 Volt DC Panel

supplies power to the Head on your boat. For more

information about the controls of your instruments con-

sult product manual in your owner’s packet.

Anchor tie off cleat

Windlass

Содержание e36



















































































































































































































Результаты поиска

Содержание e36

Отзывы:

Hunter e36, Руководство оператора, Страница: 100 / 210

Результаты поиска

Содержание e36

Отзывы: