Hunter Concert Breeze 45049-01 Скачать руководство пользователя страница 18

Страница: 18 / 20

45049-01 • 07/13/09 • Hunter Fan Company

Light:

Pressing the ON/OFF button on the remote once will turn the

light on and pressing the button again will turn the light off.

Press to increase the brightness of the light.

Press to decrease the brightness of the light.

Speaker:

Pressing the MUTE button on the remote once will turn the

speaker on and pressing the button again will turn the speaker off.

Press to increase the VOLUME of the speaker.

Press to decrease the VOLUME of the speaker.

Pressing the will switch the surround sound function between:

Right Channel

Left Channel

Mixed Channel

LED Indicators

LED Indicators

11 • Operating the Remote Control (Light/Speaker)

Содержание Concert Breeze 45049-01





















Результаты поиска

Содержание Concert Breeze 45049-01

Отзывы:

Похожие инструкции для Concert Breeze 45049-01

Бренды по названию

Популярные бренды

Hunter Concert Breeze 45049-01, Инструкция для владельца и по установке

Результаты поиска

Содержание Concert Breeze 45049-01

Отзывы:

Похожие инструкции для Concert Breeze 45049-01

Бренды по названию

Популярные бренды