Step 3
Light Kit
Installing the Casbah Light Kit on Other Hunter Fans
1. Unscrew the three screws from the upper switch housing. Disconnect
the 9-pin plug connectors. Remove the lower switch housing.
2. Push the plug button from inside the lower switch housing to remove
the plug button and switch housing cap.
Note:
Save the plug button and switch
housing cap should you choose to remove the light fixture in the future.
3. read the lower switch housing onto the wires from the light kit and screw the
lower switch housing onto the top of the light kit. Install the nut and washer onto
the threaded rod from the light kit to secure the lower switch housing.
4. Connect the black wire from the light kit to the black/white striped wire from the
light kit and connect the two white wires from the light kit to each other with
approved connectors.
5. Reconnect the 9-pin plug connectors.
6. Install screws to reattach the lower switch housing to the upper switch housing.
7. Install two A-15 60 Watt max light bulbs into the sockets.
8. read the pull chains from the switch housing through the holes in the glass.
9. Align the hole in the center of the glass with the threaded pipe from the light kit.
Securely install the finial onto the threaded pipe to secure the glass.
Steps 4–6
Step 7
Steps 8–9
Light Bulb
Socket
Finial
readed
Pipe
Pull
Chain
Steps 1–2
Nut
Washer
�
�
