7
6
Installation
–
Canopy Mount and Terminal Wiring
(continued)
Connect wiring from ceiling to terminal block (on side of canopy
mount) and tighten using flathead screwdriver (included).
The ceiling fan
must
be grounded. If the ground wire for the
installation site is not present, immediately
STOP
installation
and consult a qualified electrician.
All wiring
must
be in accordance with national and local
electrical codes ANSI/NFPA70. If you are unfamiliar with
wiring or in doubt, consult a qualified electrician.
WARNING
WARNING
1b
Single Switch Wiring
Single Switch Wiring
Green, Green Yellow Stripe, or Bare (grounding)
Green, Green Yellow Stripe, or Bare (grounding)
Black (ungrounded)
Black (ungrounded)
White (grounded)
White (grounded)
1b
Dual Switch Wiring
Dual Switch Wiring
Green, Green Yellow Stripe, or Bare (grounding)
Green, Green Yellow Stripe, or Bare (grounding)
Light
(ungrounded)
Light
(ungrounded)
White (grounded)
White (grounded)
Black
(ungrounded)
Black
(ungrounded)
Connect wiring from ceiling to terminal block (on side of canopy
mount) and tighten using flathead screwdriver (included).
