11
10
Turn Power
ON
, breaker and main switch.
Installation
- Final
ON
ON
OFF
ON
OFF
OFF
OFF
ON
ON
ON
OFF
Phillips Screw (J)
Battery Door
To access the battery compartment, remove the
small Phillips head screw (J) that secures the battery
door to the transmitter assembly. The battery should
be installed with the positive (
+
) side up. Replace
with a
CR2032
battery when necessary.
The remote control is already paired for use. For your convenience a remote function card is packed in with your remote.
Operation –
Remote
NOTICE
• Always purchase the
correct size and grade of
battery most suitable for
the intended use.
• Replace all batteries of a
set at the same time.
• Clean the battery contacts
and also those of the
device prior to battery
installation.
• Ensure the batteries are
installed correctly with
regard to polarity (+ and -).
• Remove batteries from
equipment which is not to
be used for an extended
period of time.
• Remove used batteries
promptly.
Key Press
Function
+ Quick Press
Light On/Off
+ Long Press
Light Dimming
+ Quick Press
Fan On/Off
+ Quick Press
Raise Fan Speed
+ Quick Press
Lower Fan Speed
Long Press
+
Fan Updraft
Long Press
+
Fan Downdraft
Long Press
+
Dimming Mode
On/Off
Long Press
+
Enable Beep
Long Press
+
Disable Beep
